Supported network devices
AtlantixEM Site Controller now supports the following network devices/brands:
- Cisco IOS
- Cisco Nexus
- Cisco ASA
- Cisco PIX
- F5 BIG-IP
- CheckPoint Firewall1
- Juniper NetScreen
- HP Procurve
- Nortel
- Brocade 4100/4900
- EMC DS 4700
- EMC DS 24
- Allied Telesyn. Blue Coat SG600
- Cisco Wireless Lan Controller 5500
- Brocade ICX6610-24-HPOE
- Cisco UC Telefonzeugs
- FOUNDRY-SN-AGENT-MIB
- FRITZ!BOX 7390
- FRITZ!DECT 200
- Juniper IVE
- Pulse-Gateway MAG4610
- Cisco IronPort AsyncOS
Monitoring of network devices is based on check_nwc plugin from https://labs.consol.de/nagios/check_nwc_health/.
To configure monitoring for any supported network devices you must install UPD00011 on your Site Controller.
Procedure
To enable monitoring of network devices perform the following task:
- Install UPD00011 via Update service
- Download command and services for NWC
- Review SNMP community in the services definition and make sure the one you are using has read permission on target device(s).
- [optional] Create a profile to group network devices together
- Create one endpoint for each network devices you need to monitor by specifying the management IP address
- Assign required checks to endpoints